HPSSSB Junior Engineer (Civil) Previous Year Question Paper – 2015

by

HPSSSB Hamirpur Junior Engineer (Civil) screening test of 2015 (Code C-271/2015, Series D): general knowledge, H.P. GK, English, surveying, structures, RCC and steel design, fluid mechanics, soil mechanics, irrigation, transportation and building materials. All 200 questions are included, including the Hindi language section (Q37–40). Answer key: the HPSSSB provisional answer key (Post Code 415, Series D, 12.07.2015), followed for every question.

 

Results

#1. The famous temple of Raja Gephan is at

#2. ‘Kufri Jeevan’ and ‘Kufri Jyoti’ are the two famous varieties of

#3. The total number of ear bones (in both ears) are

#4. A nanny is the female of

#5. A transformer is a device for




#6. Which of the following is a semi-conductor?

#7. The first metal to be used by man was

#8. Enzymes are made up of

#9. The KOLAR Gold mines are located in

#10. The largest ocean of the world is




#11. ____ produces the largest quantity of Saffron in India.

#12. Which planet is known as the morning and evening Star?

#13. As per Census-2011, ____ has the lowest literacy rate.

#14. Which one of the following does not find mention in the Preamble to the Constitution?

#15. After independence, the first State organised on the basis of language is




#16. From which of the countries, the Constitution of India has adopted Fundamental Duties?

#17. What is the minimum age for being the member of the Parliament (Lok Sabha)?

#18. Who is known as the founder of Slave dynasty of Delhi Sultanate?

#19. Sati system was declared illegal in the year

#20. Aryans originally belonged to




#21. Who has written the book ‘Indica’?

#22. Who started ‘Non-Cooperation Movement’ against the British in the year 1920 A.D.?

#23. Olympic rings indicate

#24. The name ‘Tiger Woods’ is associated with

#25. “Uber Cup” is associated with




#26. The name ‘Ustad Bismillah Khan’ is associated with

#27. ‘Nelumbo Nucifera’ is the Scientific name of

#28. There are ____ non-permanent members of the Security Council of UNO.

#29. ‘Gitanjali’ is the book, written by

#30. ‘Cairo’ is the capital of




#31. The nick name of (famous hero/actor of Hindi films) Govinda is

#32. The name ‘Bachhendri Pal’ is associated with

#33. Ramesh is ____ MLA.

#34. Ram enquired ____ Mohan what he could do for him.

#35. Protection from danger especially for those who leave their own country because of persecution for their political belief (give one word)




#36. Choose the correctly spelt word:

#37. ‘बटोही’ का पर्यायवाची है

#38. ‘क्षणिक’ का विलोम है

#39. ‘इत्यादि’ का संधि-विच्छेद बताइए :

#40. ‘कान गरम करना’ – मुहावरे का अर्थ है




#41. Which of the following methods of offsets involves less measurement on the ground?

#42. The correction for sag is

#43. Consider the following statements: 1. PERT is activity-oriented and adopts deterministic approach. 2. CPM is event-oriented and adopts probabilistic approach. 3. PERT is event-oriented and adopts probabilistic approach. Which of the above statements is/are correct?

#44. A steel plate is 300 mm wide and 10 mm thick. A rivet of nominal diameter 18 mm is driven. The net sectional area of the plate is

#45. The load carrying capacity of a column designed by working stress method is 500 kN. The ultimate collapse load of the column is




#46. Which of the following types of soil is transported by gravitational forces?

#47. Water content of soil can

#48. Which of the following sedimentary rocks changes into quartzite by metamorphic action?

#49. Cross-cut saw is used for

#50. The elongation of a conical bar under its own weight is equal to




#51. In the prismatic compass

#52. A telescope is said to be inverted if its

#53. Consider the following statements: Entrainment of air in concrete is done so as to 1. Increase the workability. 2. Increase the strength. 3. Increase the resistance to freezing and thawing. Which of the above statements is/are correct?

#54. Stoke’s law is valid only if the size of particle is

#55. If a material has identical properties in all directions, it is said to be




#56. The vertical posts placed at the top and bottom ends of a flight supporting the hand rail are known as

#57. The lower edge of the pitched roof, from where the rain water of the roof surface drops down, is known as

#58. Limiting values of Poisson’s ratio are

#59. If a composite bar of steel and copper is heated, then the copper bar will be under

#60. For better strength and stability, the fine grained soils and coarse grained soils are compacted respectively as (where OMC is optimum moisture content)




#61. Size of a theodolite is specified by

#62. Sensitiveness of a level tube is designated by

#63. A steel beam is replaced by a corresponding aluminium beam of same cross-sectional shape and dimensions, and is subjected to same loading. The maximum bending stress will

#64. Consider the following statements: 1. Strength of concrete cube is inversely proportional to water-cement ratio. 2. A rich concrete mix gives a higher strength than a lean concrete mix since it has more cement content. 3. Shrinkage cracks on concrete surface are due to excess water in mix. Which of the above statements is/are correct?

#65. Centre of buoyancy always




#66. The major loss of energy in long pipes is due to

#67. The basic perfect frame is a

#68. If the Young’s modulus of elasticity of a material is twice its modulus of rigidity, then the Poisson’s ratio of the material is

#69. A long column has maximum crippling load when its

#70. If the length of a simply supported beam carrying a concentrated load at the centre is doubled, the deflection at the centre will become




#71. In an internal focussing type of telescope, the lens provided is

#72. The process of turning the telescope about the vertical axis in horizontal plane is known as

#73. Two beams, one of circular cross-section and other of square cross-section, have equal areas of cross-section. If subjected to bending

#74. Two pipes of same length and diameters d and 2d respectively are connected in series. The diameter of an equivalent pipe of same length is

#75. An artesian aquifer is the one where




#76. The useful storage is the volume of water stored in the reservoir between

#77. A couple consists of

#78. A force P of 50 N and another force Q of unknown magnitude act at 90° to each other. They are balanced by a force of 130 N. The magnitude of Q is

#79. Free body diagram is an

#80. If a body is lying on a plane whose inclination with the horizontal is less than the angle of friction, then (i) a force is required to move the body upwards. (ii) a force is required to move the body downward. (iii) the body will not be in equilibrium. The correct answer is




#81. Normal tension is that pull which

#82. Agate cap is fitted with a

#83. A river training work is generally required when the river is

#84. Plywood is made by bonding together thin layers of wood in such a way that the angle between grains of any layer to grains of adjacent layers is

#85. Nominal Shear Reinforcement in RCC structures is necessary because




#86. Time and progress chart of a construction is also known as

#87. Horizontal stiffener in a plate girder is provided to safeguard against

#88. Sum of tread and rise must lie between

#89. Pitched and sloping roofs are suitable for

#90. Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to




#91. Normally prestressing wires are arranged in the

#92. According to IS 456-1978, the maximum strain in concrete at the outermost compression fiber in the limit state design of flexural member is

#93. The bond strength between steel and concrete is due to

#94. Deep beams are designed for

#95. A T-beam behaves as a rectangular beam of width equal to its flange, if its neutral axis




#96. With the increase in the rate of loading during testing, compressive strength of concrete

#97. The anchorage value of 90 degree hook is

#98. In RCC beam of breadth ‘b’ and overall depth D exceeding 750 mm, side face reinforcement required and allowable area of maximum tension reinforcement shall be respectively

#99. The maximum spacing of vertical reinforcement in RCC wall should not exceed

#100. The compressive strength of concrete determined from 150 mm × 150 mm cubes as compared to that determined from 150 mm × 300 mm cylinders is




#101. As compared to shallow-wells, deep-wells have

#102. Residual chlorine in water is determined by

#103. Period of cleaning of slow sand filters is about

#104. Which of the following retards the self purification of stream?

#105. The water tap of your house is known as




#106. If the height of the first story of the building is 3.2 m and riser is 13 cm, the number of treads required is

#107. In the veranda floor generally the outward slope is kept

#108. For heavy embankment and dams of height h, the depth of exploration of soil should not be less than the following:

#109. The type of plaster used in the modern X-ray room is done with

#110. A concrete structure is set on fire and the temperature rises to 1000 °C. The strength of the concrete as compared to original strength is reduced to the point




#111. The size of the modular bricks in the construction work is taken as

#112. The pipes which are used in the sewage system are made up of the material

#113. Which of the following items is an air binding material?

#114. The process polymerization helps to improve the property of concrete

#115. Based on flow quality, the sequence of the pipes used in the water supply system is




#116. For slacking of 10 kg of CaO the theoretical amount of water needed is

#117. If the water required for one bag of cement is 30 litre, the water-cement ratio used is

#118. The usual percentage of clay and metal in cement are

#119. Seasoning of timber is essential to remove the following:

#120. Pick up the correct statement from the following:




#121. If V is the designed speed in km/hour and R is the radius of the curve of a hill road, the superelevation (as per IRC practice) is equal to

#122. Driving vehicle on wet surfaced roads is dangerous because it may cause

#123. At road junction 16 cross conflict points are severe if

#124. While calculating the sight distance the driver’s eye above road surface is assumed to be

#125. When a no. of hairpin bends are introduced, a minimum intervening distance in between the two levels of the road is kept




#126. The gauge of a permanent way is known as

#127. The standard dimension of a wooden sleeper for B.G. Railway track is

#128. The standard width of the ballast for B.G. track in Indian railways is kept

#129. The check rails are placed opposite to the crossing so that

#130. The trap which is provided to disconnect the house drains from street sewer is




#131. Match the following lists: a. Coriolis force, b. Khosla’s curve, c. Gumbel’s method, d. Manning’s coefficient with 1. Weirs and barrages, 2. Open channel flow, 3. River meandering, 4. Estimation of flood peaks

#132. Maximum size of the fillet weld for plate of square edge is kept

#133. Match: a. Main station, b. Subsidiary station, c. Satellite station, d. Pivot station with 1. Control points of triangulation network, 2. Points not for observation but for continuation of triangular network, 3. Points to be provided additional rays to interrelated points, 4. Points close to main station to avoid intervening obstruction

#134. Match: a. Parapet wall, b. Check wall, c. Breast wall, d. Gabion wall with 1. Constructed with dry stone masonry in wire mesh, 2. To add the overall stability to the hill face, 3. To buttress the uphill slope of road cross section, 4. To give protection

#135. Match: a. Bacteria, b. Virus, c. Protozoa, d. Helminth with 1. Gastroenteritis, 2. Cholera, 3. Worms, 4. Polio




#136. The maximum dia of the steel bars as per IS-1786-2008 is

#137. The best suitable method which takes care about safety and serviceability is

#138. Flexure shear cracks are developed when shear span / effective depth is greater than

#139. In over reinforced section the failure occurs due to the

#140. In the limit state design of concrete for flexure, the area of stress block is taken as (fck is characteristic compressive strength, Xu is depth of neutral axis)




#141. A cantilever of length l carries a triangular load whose intensity varies uniformly from zero to a maximum value ‘w’ over a distance ‘a’. The maximum bending moment for the cantilever is

#142. The shear force on a beam produces

#143. A weir meant for determining the rate of flow of water is called

#144. A weir is considered as a broad crested weir when

#145. In PERT analysis, event means




#146. In PERT analysis, the duration of the activities is taken as

#147. If the nominal shear stress at a section does not exceed the permissible shear stress

#148. The effective throat thickness in ‘mm’ of a 6 mm size fillet weld with an angle 95° between the fusion faces is

#149. Web crippling in beams generally occurs at the points where

#150. A fully saturated soil having specific gravity 2.65 and void ratio of 0.75. The water content in percentage will be




#151. An ideal transition curve is

#152. Pantagraph is used for

#153. The angle between two plane mirrors of optical square, is

#154. The branch of surveying in which both horizontal and vertical positions of a point are determined by making instrumental observations, is known as

#155. The measure to remove water logging of land, is




#156. In a canal syphon, the flow is

#157. Cross hairs in surveying telescopes, are fitted

#158. The Lami’s theorem is applicable only for

#159. Minimum size of the particles of silt soil, is

#160. The condition for a lifting machine to be reversible is that its efficiency should be




#161. Pick up the incorrect statement from the following:

#162. Rankine’s theory of active earth pressure assumes

#163. The liquid limit and plastic limit exist in

#164. When the bubble of the level tube of a level remains central, the

#165. The diaphragm of a stadia theodolite is fitted with two additional




#166. Penetration test on bitumen is used for determining its

#167. Pascal second is the unit of

#168. The background colour of the informatory sign board is

#169. Ordinary rails are made of

#170. Creep is the




#171. Kaoline is a

#172. Common sand is a variety of

#173. The building stone can be dressed very easily

#174. For carrying ornamental and architectural beauty the stone should be

#175. The stone, which exhibits more fire resisting characteristics




#176. Most weather resisting metamorphic rock is

#177. Pug mill is used for

#178. The lime suitable for making mortar is

#179. To produce low heat cement it is necessary to reduce the compound

#180. The trees yielding hardwood is




#181. Addition of 1-2% sodium hydroxide in concrete

#182. The final operation of finishing floors, is known as

#183. The cement becomes useless if it adsorbs moisture more than

#184. An aggregate is known as cyclopean aggregate if its size is more than

#185. The percentage of gypsum added in cement is




#186. In case of hand mixing of concrete the extra cement to be added is

#187. The bulking of sand is maximum if moisture content is about

#188. The fineness modulus of fine aggregate is in the range of

#189. For bar in tension, a standard 180 degree hook has an anchorage value equivalent to straight length of (where φ is diameter of bar)

#190. High carbon content in the steel causes




#191. The two famous lakes ‘Chandratal’ and ‘Surajtal’ are located in the district

#192. What is the maximum altitude of Shivalik hills?

#193. The famous Luhnu Ground is located in which district?

#194. In the Mahabharata war Susharma Chandra was an ally of

#195. Who built the fort of Nagarkot in the ancient period?




#196. Which of the following tribe is not found in Himachal Pradesh?

#197. Which festival of Kinnaur is famous for flowers?

#198. Malana village of Kullu is famous for

#199. ‘Peepal Jatar Mela’ of district Kullu is organized at

#200. Which of the following jewellery is not associated with male?




Previous
Finish

Google search

Looking for More Resources?

Raman Academy ✕