Heating Effects of Current MCQ Questions and Answers

by

 

Results

#1. Joule’s law of heating states that the heat produced in a conductor is proportional to

#2. The heat produced in a resistor R carrying current I for time t is

#3. Heat produced in a conductor of resistance R across potential difference V for time t is

#4. The SI unit of heat energy is

#5. 1 calorie is equal to approximately




#6. Electric power is the rate of

#7. The SI unit of electric power is

#8. Electric power can be written as

#9. Electric power is also given by

#10. One kilowatt-hour equals




#11. The commercial unit of electrical energy is

#12. One ‘unit’ of electricity on an electricity bill is

#13. The cost of running a 100 W bulb for 10 hours at ₹6 per unit is

#14. A 1000 W heater is used for 2 hours daily for 30 days. The energy consumed is

#15. The resistance of a 100 W, 220 V bulb is




#16. Heating element wires such as in heaters are made of nichrome because it has

#17. Which of the following is a heating effect application?

#18. The filament of an incandescent bulb is made of

#19. Why is tungsten used for bulb filaments?

#20. A bulb is filled with an inert gas like argon or nitrogen mainly to




#21. A fuse works on the principle of

#22. A fuse wire should have

#23. A fuse is made of an alloy of

#24. A fuse is connected in

#25. A fuse protects a circuit from




#26. A fuse of 5 A rating

#27. Which would be safest for a household appliance drawing 8 A?

#28. MCB stands for

#29. An MCB works on the principle of

#30. Short circuit occurs when




#31. Overloading occurs when

#32. In household wiring, the colour of the live wire is generally

#33. In household wiring (India), the neutral wire is generally

#34. In household wiring (India), the earth wire insulation is

#35. The purpose of earthing an appliance is to




#36. The earth pin of a three-pin plug is

#37. Household appliances are connected in

#38. The household supply voltage in India is

#39. The frequency of household AC supply in India is

#40. Two bulbs of 40 W and 60 W (same voltage rating) in series: which glows brighter?




#41. Two bulbs of 40 W and 60 W in parallel: which glows brighter?

#42. If the voltage across a heater is halved, the power becomes

#43. If the current through a resistor is doubled, the heat produced per second becomes

#44. Resistors R₁ and R₂ in series connected to a battery: heat is more in

#45. Resistors R₁ and R₂ in parallel connected to a battery: heat is more in




#46. The efficiency of an electric heater is nearly

#47. Electric kettle, geyser and immersion rod use

#48. Electric iron is based on

#49. Maximum power transfer from a source to a load occurs when load resistance is

#50. Power dissipated in a 10 Ω resistor carrying 2 A is




#51. Heat produced in 5 Ω resistor with 2 A current for 10 s is

#52. A 2 kW heater operates on 220 V. The current drawn is approximately

#53. Electrical power in terms of resistance and current

#54. An electric bulb is rated 60 W, 120 V. Its resistance is

#55. An electric bulb rated 220 V, 100 W, when operated on 110 V gives power




#56. Which factor does NOT affect the heat produced in a conductor?

#57. Heating effect of current is

#58. The Peltier effect is related to

#59. The Seebeck effect is the production of

#60. 1 horsepower (HP) is equal to approximately




#61. An electric heater on 220 V draws 5 A. Its resistance is

#62. For safety, switches and fuses should be on the

#63. Mains electricity from a power supply to homes is generally

#64. The resistance of the filament of a bulb is greater when

#65. Power rating of an appliance tells




#66. Which wire is used for the fuse in terms of cross-section: thick or thin?

#67. LED bulbs save energy compared to incandescent bulbs because they

#68. CFL stands for

#69. The unit of power in terms of base SI units is

Previous
Finish

Google search

Looking for More Resources?

Raman Academy ✕