Results
#1. Electric current is defined as the
#2. SI unit of electric current is
#3. One ampere is equal to a flow of charge of
#4. The direction of conventional current is
#5. Electric current is a
#6. Ohm’s law states that at constant temperature the current through a conductor is
#7. According to Ohm’s law, resistance R is
#8. SI unit of electrical resistance is
#9. The resistance of a wire of length l, area of cross-section A and resistivity ρ is
#10. SI unit of resistivity is
#11. The reciprocal of resistance is called
#12. SI unit of conductance is
#13. The resistance of a wire is
#14. A wire is stretched to double its length (volume constant). Its resistance becomes
#15. If the radius of a wire is doubled (same length and material), its resistance becomes
#16. A wire of resistance R is cut into n equal parts which are joined in parallel. The equivalent resistance is
#17. With a rise in temperature, the resistance of a metallic conductor
#18. With a rise in temperature, the resistance of a semiconductor
#19. Standard resistance coils are made of manganin or constantan because these alloys have
#20. The heating elements of heaters and toasters are made of nichrome because it has
#21. The filament of an electric bulb is made of tungsten because it has
#22. Superconductivity is the phenomenon in which a material has
#23. Superconductivity was first discovered by
#24. Resistors in series have the
#25. Resistors in parallel have the
#26. The equivalent resistance of resistors R₁ and R₂ in series is
#27. The equivalent resistance of resistors R₁ and R₂ in parallel is
#28. Resistances of 2 Ω and 3 Ω are connected in series. The equivalent resistance is
#29. Resistances of 2 Ω and 3 Ω are connected in parallel. The equivalent resistance is
#30. Three resistors of 6 Ω each are connected in parallel. The equivalent resistance is
#31. The equivalent resistance of resistors in parallel is always
#32. Household appliances are connected in parallel so that
#33. An ammeter is connected in a circuit in
#34. A voltmeter is connected in a circuit in
#35. The electromotive force (emf) of a cell is the
#36. SI unit of emf is
#37. The terminal voltage of a cell of emf E and internal resistance r supplying a current I is
#38. The terminal voltage of a cell on open circuit is
#39. A cell of emf 1.5 V and internal resistance 0.5 Ω is connected to a 2.5 Ω resistor. The current is
#40. The short-circuit current of a cell of emf E and internal resistance r is
#41. Kirchhoff’s current law (junction rule) is based on the conservation of
#42. Kirchhoff’s voltage law (loop rule) is based on the conservation of
#43. The drift velocity of electrons in a metallic conductor carrying current is of the order of
#44. The relation between current I, number density n, area A, charge e and drift velocity v_d is
#45. Current density is defined as the current per unit
#46. SI unit of current density is
#47. Mobility of charge carriers is the drift velocity per unit
#48. The Wheatstone bridge is balanced when
#49. The meter bridge works on the principle of the
#50. A potentiometer is preferred over a voltmeter for measuring emf because it
#51. Electric power P is given by
#52. Electric power can also be written as
#53. SI unit of electric power is
#54. One kilowatt-hour (1 unit of electrical energy) is equal to
#55. The resistance of a 100 W, 220 V bulb is
#56. Two bulbs of 60 W and 100 W rated for the same voltage are connected in parallel. Which glows brighter?
#57. Two bulbs of 60 W and 100 W rated for the same voltage are connected in series. Which glows brighter?
#58. A fuse wire is made of a material with
#59. A fuse is always connected in
#60. When identical cells are connected in series, the total emf is
#61. When identical cells are connected in parallel, the total emf is
#62. An appliance of 220 V takes a current of 5 A for 2 hours. The energy consumed is
#63. A current of 5 A flows for 10 s. The charge that flows is
#64. The number of electrons flowing per second for a current of 1 A is about
#65. A variable resistance used to control current in a circuit is called a

