Electric Current, Resistance and EMF MCQ Questions and Answers

by

 

Results

#1. Electric current is defined as the

#2. SI unit of electric current is

#3. One ampere is equal to a flow of charge of

#4. The direction of conventional current is

#5. Electric current is a




#6. Ohm’s law states that at constant temperature the current through a conductor is

#7. According to Ohm’s law, resistance R is

#8. SI unit of electrical resistance is

#9. The resistance of a wire of length l, area of cross-section A and resistivity ρ is

#10. SI unit of resistivity is




#11. The reciprocal of resistance is called

#12. SI unit of conductance is

#13. The resistance of a wire is

#14. A wire is stretched to double its length (volume constant). Its resistance becomes

#15. If the radius of a wire is doubled (same length and material), its resistance becomes




#16. A wire of resistance R is cut into n equal parts which are joined in parallel. The equivalent resistance is

#17. With a rise in temperature, the resistance of a metallic conductor

#18. With a rise in temperature, the resistance of a semiconductor

#19. Standard resistance coils are made of manganin or constantan because these alloys have

#20. The heating elements of heaters and toasters are made of nichrome because it has




#21. The filament of an electric bulb is made of tungsten because it has

#22. Superconductivity is the phenomenon in which a material has

#23. Superconductivity was first discovered by

#24. Resistors in series have the

#25. Resistors in parallel have the




#26. The equivalent resistance of resistors R₁ and R₂ in series is

#27. The equivalent resistance of resistors R₁ and R₂ in parallel is

#28. Resistances of 2 Ω and 3 Ω are connected in series. The equivalent resistance is

#29. Resistances of 2 Ω and 3 Ω are connected in parallel. The equivalent resistance is

#30. Three resistors of 6 Ω each are connected in parallel. The equivalent resistance is




#31. The equivalent resistance of resistors in parallel is always

#32. Household appliances are connected in parallel so that

#33. An ammeter is connected in a circuit in

#34. A voltmeter is connected in a circuit in

#35. The electromotive force (emf) of a cell is the




#36. SI unit of emf is

#37. The terminal voltage of a cell of emf E and internal resistance r supplying a current I is

#38. The terminal voltage of a cell on open circuit is

#39. A cell of emf 1.5 V and internal resistance 0.5 Ω is connected to a 2.5 Ω resistor. The current is

#40. The short-circuit current of a cell of emf E and internal resistance r is




#41. Kirchhoff’s current law (junction rule) is based on the conservation of

#42. Kirchhoff’s voltage law (loop rule) is based on the conservation of

#43. The drift velocity of electrons in a metallic conductor carrying current is of the order of

#44. The relation between current I, number density n, area A, charge e and drift velocity v_d is

#45. Current density is defined as the current per unit




#46. SI unit of current density is

#47. Mobility of charge carriers is the drift velocity per unit

#48. The Wheatstone bridge is balanced when

#49. The meter bridge works on the principle of the

#50. A potentiometer is preferred over a voltmeter for measuring emf because it




#51. Electric power P is given by

#52. Electric power can also be written as

#53. SI unit of electric power is

#54. One kilowatt-hour (1 unit of electrical energy) is equal to

#55. The resistance of a 100 W, 220 V bulb is




#56. Two bulbs of 60 W and 100 W rated for the same voltage are connected in parallel. Which glows brighter?

#57. Two bulbs of 60 W and 100 W rated for the same voltage are connected in series. Which glows brighter?

#58. A fuse wire is made of a material with

#59. A fuse is always connected in

#60. When identical cells are connected in series, the total emf is




#61. When identical cells are connected in parallel, the total emf is

#62. An appliance of 220 V takes a current of 5 A for 2 hours. The energy consumed is

#63. A current of 5 A flows for 10 s. The charge that flows is

#64. The number of electrons flowing per second for a current of 1 A is about

#65. A variable resistance used to control current in a circuit is called a




#66. Which of the following does NOT obey Ohm’s law?

Previous
Finish

Google search

Looking for More Resources?

Raman Academy ✕